SUPPORTED MODELS SMART KEY AND BLADE KEY

Nissan Altima 2013+
Nissan Juke 2014+
Nissan Pathfinder 2013+
Nissan Pulsar 2014+
Nissan Rogue 2014+
Nissan Qashqai 2014+
Nissan X-Trail 2014+
Nissan Maxima 2016+
Nissan Murano III(Z52) 2015+
Nissan Teana 2014+
Infiniti JX35 2013+
Infiniti Q50 2014+
Infiniti QX50 2014+
Infiniti QX60 2014+

1. Insert the key, turn on the ignition.
2. Connect the device to the OBD-2 diagnostic connector. The green LED will light.
3. After 5 seconds, the device will emit 3 short beeps and the green LED will light.
4. Turn the ignition off and on twice. The key indicator on the instrument panel will blink 5 times and should go out.
5. Turn off the ignition.
*To record an additional key within 5 seconds, insert a new key and turn on the ignition after step 3, and complete steps 4 and 5.
.
INTELLIGENT KEY System, SMART KEY System, SMART KEY-2 System, BLADE KEY-3
The switches must be installed carefully. Only with forward and backward movements. Do not press the switches from above or press them